FANDOM


Attaching pi-brackets to field-frame bars Edit

Begin by drilling 2 pairs of holes to each field-frame bar; these holes will receive the tenons of the pi-brackets. Unless the pi-brackets are of exactly identical dimensions, it's probably best to match the hole to each individual bracket. You should end up with a set like this:

Field-frame bars and pi-brackets

Once the holes have been driller (or punched, if you've heated the bars), push the tenons of the pi-brackets through them:

Attaching pi-brackets to field-frame bars - 01

Bend the tenons first slightly...

Attaching pi-brackets to field-frame bars - 02

Then aggressively to lock them into place...

Attaching pi-brackets to field-frame bars - 03

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.