Introduction Edit

The T-clamps attach the little ladder beams to the case. This article shows a simple way to make using cold-forging/bending. An equally useful hot-forging method is described on the Forging T-clamps page.

The process step-by-step Edit

First make a model T-clamp for thin, easily bent steel (on the left). Once you've found the correct proportions, unfold it, cut slightly longer pieces of the thicker T-clamp steel (above). Bend these into U-shape while keeping a piece of the little ladder beam steel in between the halves. The results should similar to those in the picture on the right:

Making T-clamps - 01

Attach the T-clamp to the vise, with the little ladder steel piece in between:

Making T-clamps - 02

Bend the U into T-shape carefully using a hammer:f

Making T-clamps - 03

Making T-clamps - 04

The results should look like this:

Making T-clamps - 05

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.